Directory: projects/themis/examples/advanced/

Contents

.pro files

thm_crib_cleanefp.pro

thm_crib_cleanefw.pro

thm_crib_cotrans_lmn.pro

thm_crib_eclean_subsolar.pro

thm_crib_efi_cal.pro

NAME: thm_crib_efi_calPURPOSE: Allows comparison of calibrated, semi-calibrated and raw EFI dataCALLING SEQUENCE: thm_crib_efi_cal, date = date, probe = probe, datatype = datatype, $ trange = trange, /split_componentsINPUT: None explicitOUTPUT: No explicit output, a bunch of tplot variables are created for the given probe, date and datatype;for example, for probe='c' and datatype='eff', then varibles named: 'tha_eff_raw', 'tha_eff_no_edc_offset', 'tha_eff_calfile_edc_offset', and 'tha_eff_full' are created.

thm_crib_esa_bgnd_remove.pro

Procedure: thm_crib_esa_bgnd_removePurpose: Demonstrate examples of background contamination removel from ESA particle data.

thm_crib_esa_da.pro

thm_crib_esa_moments.pro

thm_crib_fac.pro

Procedure: thm_crib_facPurpose: A crib on showing how to transform into field aligned coordinates DSL coordinatesNotes: $LastChangedBy: pcruce $ $LastChangedDate: 2013-09-19 10:56:58 -0700 (Thu, 19 Sep 2013) $ $LastChangedRevision: 13080 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/examples/advanced/thm_crib_fac.pro $

thm_crib_greenland_gmag.pro

thm_crib_maccs_gmag.pro

thm_crib_make_ae.pro

pro thm_crib_make_AE This is an example crib sheet that will calculate and plot "pseudo" geomagnetic indices (thmAE, thmAU, thmAL) as derived from THEMIS ground magnetometer data.

thm_crib_map.pro

thm_crib_mom_dead_time_correct.pro

NAME: thm_crib_mom_dead_time_correctPURPOSE: example for use of dead time corrections for on-board moments calculated from ground-based moments.

thm_crib_mva.pro

Procedure: thm_crib_mvaPurpose: A crib on showing how to transform into minimum varianceanalysis coordinatesNotes: $LastChangedBy: pcruce $ $LastChangedDate: 2013-09-19 10:56:58 -0700 (Thu, 19 Sep 2013) $ $LastChangedRevision: 13080 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/examples/advanced/thm_crib_mva.pro $

thm_crib_neutral_sheet.pro

Name: thm_crib_neutral_sheet Purpose:crib to demonstrate use of the neutral sheet routines and means for generating plots.

thm_crib_part_combine.pro

*** WARNING: The software demostrated in this crib is still undergoing testing.

thm_crib_part_slice1d.pro

Purpose: Crib sheet exampling production of 1D plots from 2D particle velocity contours.

thm_crib_part_slice2d_adv.pro

Purpose: A crib showing advanced usage of the 2D velocity slices code.

thm_crib_part_slice2d_multi.pro

A Secondary Crib: Create Multiple Slices and Export:

thm_crib_part_slice2d_plot.pro

Purpose: A crib showing plotting options for 2D particle slices.

thm_crib_poynting_flux.pro

thm_crib_read_write_ascii_cmdline.pro

Name: thm_crib_read_write_ascii_cmdline Purpose:crib to demonstrate use of the read_ascii_cmdline and the write_ascii_cmdline IDL procedures SEE ALSO: idl/ssl_general/misc/write_ascii_cmdline.pro idl/ssl_general/misc/write_ascii.pro idl/ssl_general/misc/read_ascii_cmdline.pro and read_ascii.pro in the lib subdirectory of the idl distribution To run type 'thm_crib_read_write_ascii_cmdline'

thm_crib_recovery_Vxy_mom_early_2007.pro

thm_crib_rxy.pro

Procedure: rxy_crib.proPurpose: A crib showing how to transform data into the RXY coordinate system.

thm_crib_scpot2dens.pro

thm_crib_slp_sse.pro

thm_crib_slp_ssePurpose: Crib to demonstrate how to use Solar Lunar Planetary Data, And how to perform SSE transformation $LastChangedBy: pcruce $ $LastChangedDate: 2013-09-19 10:56:58 -0700 (Thu, 19 Sep 2013) $ $LastChangedRevision: 13080 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/examples/advanced/thm_crib_slp_sse.pro $

thm_crib_spinfit.pro

Batch File: THM_SPINFIT Purpose: Demonstration of finding spin fit parameters for spinning data.

thm_crib_sse.pro

Procedure: sse_crib.proPurpose: A crib showing how to transform data from GSE to SSE coordinate system.

thm_crib_sst_load_calibrate.pro

Name: thm_crib_sst_load_calibrate Purpose: Demonstrate usage of thm_sst_load_calibrate $LastChangedBy: pcruce $ $LastChangedDate: 2013-09-19 11:14:02 -0700 (Thu, 19 Sep 2013) $ $LastChangedRevision: 13081 $ $URL $

thm_crib_sst_set_calibrations.pro

thm_crib_superpo_interpol_histo.pro

Batch File: THM_CRIB_SUPERPOSED_INTERPOL_HISTO Purpose: Demonstrates the application of the routines superpo_interpol and superpo_histo Note: The examples in this crib sheet call 'superpo_interpol'.

thm_crib_tplot_overlay.pro

PROCEDURE: thm_crib_tplot_overlay ***** A copy and paste crib *****PURPOSE: A crib showing how to overlay spectra on top of spectra.

thm_crib_twavpol.pro

********************************************************************** thm_crib_twavpol.pro : with twavpol.pro **********************************************************************This version stores these outputs as tplot variables with thespecified prefix These are follows: Wave power: On a linear scale, at this stage no units Degree of Polarisation: This is similar to a measure of coherency between the input signals, however unlike coherency it is invariant under coordinate transformation and can detect pure state waves which may exist in one channel only.100% indicates a pure state wave.

thm_crib_twavpol_scm.pro

NAME: twavpol_scm_cribPurpose: Demonstrate the usage of the wave polarization routines.

thm_crib_validate_high_freq_using_phase.pro