Directory: projects/themis/spacecraft/particles/SST/

Contents

.pro files

dat2angsplit.pro

PROCEDURE: dat2angsplitHELPER functiontake the dat component of a structure and splits it into an arrayordered in terms of theta = energy*angle->energy*theta*phidimensions 16*64->16*4*16, phi is guaranteed to be contiguous butnot necessarily ascending(some phi may be out of phase by 180 degrees)returns indices to perform this transformation $LastChangedBy: lphilpott $ $LastChangedDate: 2012-06-14 10:44:44 -0700 (Thu, 14 Jun 2012) $ $LastChangedRevision: 10559 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/spacecraft/particles/SST/dat2angsplit.pro $

thm_load_sst.pro

thm_load_sst_old.pro

thm_pdist.pro

$Id: $

thm_sst_add_spindata.pro

Procedure: THM_SST_ADD_SPINDATA.PROPurpose: Adds appropriate spin model data to SST common block structure.

thm_sst_atten_scale.pro

NAME: thm_sst_atten_scalePURPOSE: This routine determines the appropriate attenuator scale factor array based on the SST angle mode and the attenuator flagsInputs: atten_flags: 4-bit flag indicating which attenuators are engaged data_dims: The return value of dimen(data.data)Keywords: scale_factors(optional): 4-element array with the scaling factors for each attenuator pinhole.

thm_sst_convert_units.pro

thm_sst_crib.pro

pro thm_sst_crib This is an example crib sheet that will load Solid State Telescope data.

thm_sst_dat2angsplit.pro

PROCEDURE: thm_sst_dat2angsplitHELPER functiontake the dat component of a structure and splits it into an arrayordered in terms of theta = energy*angle->energy*theta*phidimensions 16*64->16*4*16, phi is guaranteed to be contiguous butnot necessarily ascending(some phi may be out of phase by 180 degrees)returns indices to perform this transformation $LastChangedBy: lphilpott $ $LastChangedDate: 2012-06-15 12:11:29 -0700 (Fri, 15 Jun 2012) $ $LastChangedRevision: 10569 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/spacecraft/particles/SST/thm_sst_dat2angsplit.pro $

thm_sst_dist3d_16x1.pro

thm_sst_dist3d_16x1__define.pro

thm_sst_dist3d_16x6.pro

thm_sst_dist3d_16x64.pro

thm_sst_dist3d_16x64__define.pro

thm_sst_dist3d_16x6__define.pro

thm_sst_dist3d_def.pro

thm_sst_energy_cal.pro

thm_sst_energy_extrapolate.pro

PROCEDURE: thm_sst_energy_extrapolatePURPOSE: Performs linear extrapolation of sst data to a new set of lower energiesINPUTS: dist_data: The sst data structure on which the extrapolation should be performed.

thm_sst_erange_bin_val.pro

PROCEDURE: THM_SST_ERANGE_BIN_VALPurpose: This routine generates the values that will be subtracted to remove electronic noise.

thm_sst_find_masking.pro

PROCEDURE: THM_SST_FIND_MASKINGPurpose: This routine is designed to find the indices of the masking in the SST Full distribution data.

thm_sst_load.pro

thm_sst_pseb.pro

Procedure: THM_SST_PSEBVERSION: $LastChangedBy: $ $LastChangedDate: $ $LastChangedRevision: $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/thmsoc/trunk/idl/themis/spacecraft/particles/SST/thm_sst_psef.pro $

thm_sst_psef.pro

Procedure: THM_SST_PSEF For documentation on sun contamination correction keywords that may be passed in through the _extra keyword please see: thm_sst_remove_sunpulse.pro or thm_crib_sst_contamination.proVERSION: $LastChangedBy: aaflores $ $LastChangedDate: 2013-08-28 10:30:47 -0700 (Wed, 28 Aug 2013) $ $LastChangedRevision: 12904 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/spacecraft/particles/SST/thm_sst_psef.pro $

thm_sst_pser.pro

$Id: thm_sst_pser.pro 13003 2013-09-09 23:58:02Z pcruce $

thm_sst_psif.pro

Procedure: THM_SST_PSIF For documentation on sun contamination correction keywords that may be passed in through the _extra keyword please see: thm_sst_remove_sunpulse.pro or thm_crib_sst_contamination.proVERSION: $LastChangedBy: aaflores $ $LastChangedDate: 2013-08-28 10:30:47 -0700 (Wed, 28 Aug 2013) $ $LastChangedRevision: 12904 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/trunk/projects/themis/spacecraft/particles/SST/thm_sst_psif.pro $

thm_sst_psir.pro

$Id: thm_sst_psir.pro 12904 2013-08-28 17:30:47Z aaflores $

thm_sst_remove_sunpulse.pro

PROCEDURE: THM_SST_REMOVE_SUNPULSEPurpose: Routine to perform a variety of calibrations on full distribution sst data.

thm_sst_set_trange.pro

Procedure: thm_sst_set_trangePurpose: Helper function for thm_load_sst.

thm_sst_status.pro

thm_sst_to_tplot.pro