DIB table 2015 Aug 5

From RHESSI Wiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
Last updated 2013 Feb. 14
+
Last updated 2013 Sept. 30
   address DIB table: 1 2 3 4 5 6 7 8 9
   address DIB table: 1 2 3 4 5 6 7 8 9
-
   0 General control 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A
+
   0 General control 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A
-
   1 global enables         0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
+
   1 global enables         0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
-
   2 front enables         0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29
+
   2 front enables         0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29
-
   3 front decimation 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+
   3 front decimation 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-
   4 rear enables         0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D
+
   4 rear enables         0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D
-
   5 rear decimation         0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85
+
   5 rear decimation 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85
-
   6 pulser frequency code 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B
+
   6 pulser frequency code 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B
-
   7 front slow threshold 0x0C 0x58 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C
+
   7 front slow threshold 0x0C 0x38 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C
-
   8 front fast threshold 0x22 0x80 0x22 0x50 0x22 0x22 0x22 0x22 0x22
+
   8 front fast threshold 0x22 0x80 0x22 0x50 0x22 0x22 0x22 0x22 0x22
-
   9 rear slow threshold 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30
+
   9 rear slow threshold 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30
-
   10 rear fast threshold 0x45 0x45 0x60 0x55 0x45 0x45 0x45 0x45 0x60
+
   10 rear fast threshold 0x45 0x45 0x60 0x55 0x45 0x45 0x45 0x45 0x60
-
   11 12-bit pulser amplitude 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+
   11 12-bit pulser amplitude 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00
A note on converting threshold values to keV:
A note on converting threshold values to keV:

Revision as of 22:07, 30 September 2013

Last updated 2013 Sept. 30

 address	DIB table:	1	2	3	4	5	6	7	8	9
 0	General control 	0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A 0x0A
 1	global enables	        0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01
 2	front enables	        0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29 0x29
 3	front decimation	0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
 4	rear enables	        0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D 0x2D
 5	rear decimation	0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85 0x85
 6	pulser frequency code	0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B 0x0B
 7	front slow threshold	0x0C 0x38 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C 0x0C
 8	front fast threshold	0x22 0x80 0x22 0x50 0x22 0x22 0x22 0x22 0x22
 9	rear slow threshold	0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30
 10	rear fast threshold	0x45 0x45 0x60 0x55 0x45 0x45 0x45 0x45 0x60
 11	12-bit pulser amplitude	0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00

A note on converting threshold values to keV:

Very roughly, the standard threshold, 0x0C, represents a little under 3 keV. So 0x58 is roughly 88/12 * 3 = 22 keV. Probably a little lower. But in the end we want to calibrate this using flare data.

Old tables: DIB-table-2013-Feb-14

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox