Detector 6
From RHESSI Wiki
(Difference between revisions)
NicoleDuncan (Talk | contribs) |
|||
| Line 22: | Line 22: | ||
15-030-00:19:54 /IDPUTABLE6 OFFSET=FRONTFASTDAC | 15-030-00:19:54 /IDPUTABLE6 OFFSET=FRONTFASTDAC | ||
15-030-00:20:17 /IDPLOAD VALUE=0x30 ; was 0x22 | 15-030-00:20:17 /IDPLOAD VALUE=0x30 ; was 0x22 | ||
| + | |||
| + | *Another raise to D6 front fast threshold, same reason: | ||
| + | 15-058-21:41:11 /IDPUTABLE6 OFFSET=FRONTFASTDAC | ||
| + | 15-058-21:41:44 /IDPLOAD VALUE=0x40 | ||
| + | |||
===D6 front slow LLD threshold history=== | ===D6 front slow LLD threshold history=== | ||
| Line 28: | Line 33: | ||
| post 2014 anneal || 0x0C (after segmentation) | | post 2014 anneal || 0x0C (after segmentation) | ||
|- | |- | ||
| - | | | + | | 2015 Jan 26 21:57:13 UTC || 0x30 (was 0x0C) |
|- | |- | ||
| - | | | + | | 2015 Jan 27 21:37:03 UTC || 0x0C (was 0x30) |
|- | |- | ||
|} | |} | ||
| Line 39: | Line 44: | ||
| post 2014 anneal || 0x22 (after segmentation) | | post 2014 anneal || 0x22 (after segmentation) | ||
|- | |- | ||
| - | | | + | | 2015-Jan-30 00:20:17 || 0x30 (was 0x22) |
| + | |- | ||
| + | | 2015-Feb-27 21:41:44 || 0x40 (was 0x30) | ||
|- | |- | ||
|} | |} | ||
| Line 54: | Line 61: | ||
| post 2014 anneal || 0x45 (after segmentation) | | post 2014 anneal || 0x45 (after segmentation) | ||
|- | |- | ||
| - | | | + | | 2015-Jan-08 17:45:18 || 0x50 (was 0x45) |
|- | |- | ||
|} | |} | ||
Revision as of 04:10, 1 March 2015
This page contains information about changes/issues for RHESSI detector 6 after the 2014 anneal. Detector updates from 2012-mid 2014 can be found here: Detector 6 anneal 2012
Contents |
Notes
After the 2014 anneal, detector 6 began its reincarnated life as an unsegmented detector but segmented shortly after (see below).
- On 2014 August 14, the HV on D6 was raised to 4926V in an attempt to segment it. This was successful, and D6 now operates as a segmented detector. Since its segmentation is borderline as of Aug/Sept 2014, it commonly unsegments during and just after the SAA.
- On 2014 Jan 8, the rear fast threshold was raised since fast counts were eating up a lot of livetime.
15-008-17:44:55 /IDPUTABLE6 OFFSET=REARFASTDAC 15-008-17:45:18 /IDPULOAD VALUE=0x50 ;(was 0x45)
- * D6 has been showing some strange peaks in the spectrum; these are best seen as multiple lines (that drift) in spectrograms. On Monday, Jan 28 we raised the slow front threshold on D6 to ~10 keV and kept it there for a day before returning to the nominal ~3 keV. This is intended to see if the slow threshold affects the abnormal spectral lines.
15-026-21:57:13 / D6 front slow threshold to 0x30 (was 0x0C). 15-027-21:37:03 / D6 front slow threshold to 0x0C (was 0x30).
- D6 fast rates are a bit high (have been rising slowly over the past week). It would be a good idea to raise the front fast threshold a touch. I didn't want to do this at the same time as the slow threshold experiment!
- D6 front fast threshold was adjusted from default (0x22) due to increased rates, based on the above suggestion. Rates dropped from 3300 to 1250 when the change was made.
15-030-00:19:54 /IDPUTABLE6 OFFSET=FRONTFASTDAC 15-030-00:20:17 /IDPLOAD VALUE=0x30 ; was 0x22
- Another raise to D6 front fast threshold, same reason:
15-058-21:41:11 /IDPUTABLE6 OFFSET=FRONTFASTDAC 15-058-21:41:44 /IDPLOAD VALUE=0x40
D6 front slow LLD threshold history
| post 2014 anneal | 0x0C (after segmentation) |
| 2015 Jan 26 21:57:13 UTC | 0x30 (was 0x0C) |
| 2015 Jan 27 21:37:03 UTC | 0x0C (was 0x30) |
D6 front fast LLD threshold history
| post 2014 anneal | 0x22 (after segmentation) |
| 2015-Jan-30 00:20:17 | 0x30 (was 0x22) |
| 2015-Feb-27 21:41:44 | 0x40 (was 0x30) |
D6 rear slow LLD threshold history
| post 2014 anneal | 0x30 (after segmentation) |
D6 rear fast LLD threshold history
| post 2014 anneal | 0x45 (after segmentation) |
| 2015-Jan-08 17:45:18 | 0x50 (was 0x45) |
D6 HV history
| post 2014 anneal | 4510 V (unsegmented) |
| 2014-Aug-14 03:40 UTC | 4926 V (was 4510 V) (segmented) |
